How to set up Wireless Network Connection on Windows PC

Download PC Repair Tool to quickly find & set Windows errors automatically

Wireless networks allow you to work independently – without the tension of plugging in long wires that not but expect bad in the business firm just also are a prophylactic hazard. Since wireless signals travel in all directions and travel fast, you can use a wireless network to work from your sleeping accommodation or the porch of your home. This article explains how to set up a wireless network connectedness in Windows 11/10/8/7.

Inventory required to Set Up Wireless Network Connection

Since nosotros are talking of a completely wireless network, nosotros need the following items to set upward a wireless network connexion:

An operating organization that supports wireless networking. Windows is a good operating organization that allows you to create wireless networks without any problems.
A fast Internet connection: You tin can go for either a DSL or cablevision broadband. In almost cases, the cable or DSL router (meet point iii below) is provided past the ISP who too sets up an Internet connection. Normally, the connectedness from the wall jack (in the example of DSL) and hub (in the case of cable) is wired to the router from where wireless signals take over for communication.
A wireless router: Since we demand a wireless network, nosotros volition need a wireless router. Check to run into if your ISP can give you one. If not, you can get a wireless router from any computer market place. Make sure you buy a reputed product for better results. Routers are available in different technologies. I suggest 802.11g or 802.11n for amend connectivity and good signals. Routers using the mentioned technologies are more uniform with network adaptors of dissimilar companies. Make sure that yous are buying a wireless router and not wireless access points. The latter is used to expand existing wired networks and does non serve the purpose of wireless routers.
Wireless Adaptors: Nearly computers now come up with built-in wireless adaptors. They are ordinarily towards the forepart of laptops and computers and bear a switch that you can turn on and off to enable and disable network connectivity. If your computer does not have one, you tin buy wireless adaptors from a computer store. I suggest that you purchase USB wireless adaptors every bit they are quick and like shooting fish in a barrel to install. Also, you tin use them with different computers, dissimilar the card-blazon adaptors that need to be installed on the motherboards. Also, when buying wireless network adaptors, make sure they friction match the network technology of the router you are using in the network. That is, if you are using an 802.11n router, your network adaptors should also be 802.11n. This ensures better connectivity.

To check if your figurer has wireless network adaptors, proceed with the following steps:

Open up Control Panel
Double click Network And Sharing (available under Network and Internet if you lot are using Category view)
In the left pane, click on Manage Network Adaptors
If your computer has a wireless network adaptor, it volition bear witness you lot a network icon saying Wireless Network Connectedness.

Setting Up Wireless Internet Connexion on Windows PC

Near of the ISPs gear up an Net connectedness when you take a new connection. If your ISP did not ready the Cyberspace for you, follow these steps (assumes your modem includes a wireless router):

Plug i end of the phone wire into the phone jack provided on the router's back
Plug the other finish of phone wire into wall jack of phone connectedness. If you are using a splitter, connect this end of phone wire into the splitter socket that says DSL. You can then use another phone wire to connect the splitter to the wall jack of the phone
Plug the router into an electrical socket.
Turn on the main estimator that you volition use to set up admin privileges.
Open Control Panel. If information technology is non in the Icon view, switch to the Icon view.
Click Network And Sharing Center
Beneath View Your Active Networks, click Setup A New Connection or Network
Double click Connect To Net and follow the steps in the Wizard

If your modem is different from a wireless router, you will demand to connect phone wire – one end into the modem and another end into telephone jack or splitter. Yous can so connect the modem to a wireless router using a network cablevision. You tin and then follow the steps iv to 7 mentioned in a higher place. Information technology should wait somewhat like the epitome beneath.

At this bespeak, your main computer should be able to connect to the Internet. If information technology is not connecting to the Internet, the connections must be incorrect. Cheque the Network and Sharing window in Command Panel to run across if Windows 7 tin can notice the wireless network (see figure 1 above). If not, make certain the modem/router is properly continued and switched on.

Related: How to add a new Wi-Fi Network Profile in Windows x.

Securing The Network

Assuming that the main computer is at present able to connect to the Internet, nosotros will go ahead and configure the network for security.

Click the Network icon in Windows organisation tray
Click Open Network And Sharing
Click Setup A New Connexion Or Network
Double click Setup A New Network
The wizard volition walk yous through a series of steps to configure your network
If your router supports WPA2, the magician volition prove it in the list under Security Level. Set up the Security Type to AES. Type a password nether Security Key and click Side by side
Re-create the security central to some rubber identify so that you can utilise it when setting up other computers in the network. You volition also need it later when you lot wish to make changes to the network

Setting Up Other Computers On The Network

Click the Network icon in the Windows System Tray
Select your network (recognized past the name you provided in the wizard above)
Windows volition ask you for the password. Enter the password you saved in step 7 above.

Setting Upward Sharing On The Network

Y'all have to turn on sharing on all computers, including the ones having devices such as printers and scanners so that you lot can use them from whatsoever computer on the network. The post-obit applies to each estimator on the network

Click the Network icon
Click Open Network and Sharing Heart
Click Choose Homegroup and Sharing Options. A wizard will walk y'all through setting upward sharing for files and devices attached to the computer.

Notation that you tin can share files by copying them into Public binder in Windows 7. The Public binder is available in C:\Users folder.

This explains how to set upward a wireless network connexion in Windows 11/10/8/7. If you confront whatsoever problems, nosotros will be happy to assistance. Merely drib a note in the comments stating the problem and your version of Windows.

Related read: How to set a Broadband (PPPoE) connection in Windows.

Arun Kumar is a Microsoft MVP alumnus, obsessed with technology, especially the Internet. He deals with the multimedia content needs of training and corporate houses. Follow him on Twitter @PowercutIN